Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 13

1954 Eames Herman Miller DTW 4 Dining Table White Laminate Top & Cross Brace

About the Item

Listed for sale is a very rare and early Eames for Herman Miller square DTW-4 dining table with circular wood dowel legs. This example was produced after the straight-legged DTW was taken out of production in 1950. This was produced from 1950-1957 by Herman Miller. This particular table has a white laminate top and black legs. It has a unique x-bracing to it, which could imply either prototypical production or a retrofit by the original owner to stabilize the legs further. Regardless, it adds to the provenance and historical importance of this unique piece. Solid original examples of the DTW-4 are hugely difficult to find. Writing underneath the table suggests that this was used in an office setting originally and was later purchased from a Pittsburgh Estate, where this was used as a dining table. It measures 34 inches wide by 34 inches deep and is 28.5 inches tall.
  • Creator:
    Herman Miller (Manufacturer),Charles and Ray Eames (Designer)
  • Dimensions:
    Height: 28.5 in (72.39 cm)Width: 34 in (86.36 cm)Depth: 34 in (86.36 cm)
  • Style:
    Modern (In the Style Of)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    1954
  • Condition:
    Wear consistent with age and use.
  • Seller Location:
    Philadelphia, PA
  • Reference Number:
    Seller: 200909191stDibs: LU8164235954452

More From This Seller

View All
1971 Herman Miller Eames Universal 42 in Square Dining Table with Laminate Top
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is an Eames Universal Dining Table, Model ET206, originally designed by Ray and Charles Eames in 1961. This particular example was produced by Herman Miller in the USA C. 1971. ...
Category

Vintage 1970s American Modern Dining Room Tables

Materials

Aluminum, Steel

1990s Herman Miller Eames Segmented Conference / Dining Table 36 x 60 ET149
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This is a Segmented Conference Dining Table, Model ET149, initially designed by Ray and Charles Eames for Herman Miller in 1964. These pieces date to the 1990s. The listed price incl...
Category

Early 2000s American Modern Dining Room Tables

Materials

Steel

2011 Herman Miller Eames Contract Dining Table 42 inch Round Faux Oak 3x Avail
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is an Eames Contract Base Table Range. Originally designed in 1964 by Ray and Charles Eames, this particular example was produced by Herman Mi...
Category

2010s American Modern Dining Room Tables

Materials

Aluminum, Steel

C. 1980s Herman Miller Eames Oval Segmented ET151 Conference Table 42 x 72
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is a Segmented Conference Dining Table, Model ET151, initially designed by Ray and Charles Eames for Herman Miller in 1964. These pieces date to the 1980s. The listed price incl...
Category

Vintage 1980s American Modern Dining Room Tables

Materials

Steel

1954 George Nelson for Herman Miller Ebonized X Leg Dining Table / Desk 7230-X
By George Nelson, Herman Miller
Located in Philadelphia, PA
Listed for sale is a very rare George nelson X leg dining table / desk, produced by Herman Miller. This example is the model number 7230-X ta...
Category

Vintage 1950s American Modern Dining Room Tables

Materials

Steel

1954 Herman Miller Eames Rope Edge DAX Arm Shell Dining Chair X Base 3 Available
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
These are Eames DAX fiberglass dining chairs, initially designed by Ray and Charles Eames in 1950. These particular examples were produced by Herman Miller in the USA C. 1954. Their design incorporates a tan fiberglass shell seat atop a steel X-base. DAX is an acronym for Dining Arm X Base Chair...
Category

Vintage 1950s American Modern Side Chairs

Materials

Steel

You May Also Like

Eames Herman Miller Oval Conference Dining Table Universal Segmented Laminate #2
By Herman Miller, Charles and Ray Eames
Located in Topeka, KS
Incredible vintage MCM (Mid-Century Modern) Eames for Herman Miller racetrack oval conference or dining table with a black universal segmented base and a light blonde laminate top wi...
Category

Late 20th Century American Mid-Century Modern Dining Room Tables

Materials

Aluminum, Steel

Eames Herman Miller Round Table Universal Base Wood Grain Laminate Top
By Herman Miller, Charles and Ray Eames
Located in Topeka, KS
Renowned Eames Herman Miller round table with the universal base and a wood grain laminate top with off white edge trim, black painted shaft, and polished aluminum base. Wonderful vintage condition with no outstanding flaws that we have detected. Please see photos, circa 1960s-1970s. A prestigious Mid-Century Modern design by the well-known husband and wife duo Charles and Ray Eames: “The Universal Base Table. With a typical focus on beauty and utility in design, the Eames Round Table is as graceful, versatile and remains as relevant as it was back in the 1960s. The Eames Universal...
Category

Mid-20th Century American Mid-Century Modern Dining Room Tables

Materials

Aluminum, Steel

Herman Miller 650 Eames Dining Table
By Charles and Ray Eames, Herman Miller
Located in Brooklyn, NY
Classic Herman Miller Eames dining table. Model 650, executed in white Formica durable top with black banding and cast aluminum base. All glides present. Bas...
Category

Mid-20th Century American Mid-Century Modern Dining Room Tables

Materials

Aluminum

Eames Table for Herman Miller
By Charles and Ray Eames, Herman Miller
Located in San Pedro Garza Garcia, Nuevo Leon
A piece of the Eames should not be missing at home or office, and this is a good piece as for a desk as for a dining room, the top is in a good condition as well as the aluminum, it ...
Category

1990s American Mid-Century Modern Dining Room Tables

Materials

Aluminum

Charles and Ray Eames Dining Table DTW-1
By Herman Miller, Charles and Ray Eames
Located in Los Angeles, CA
Rare early rectangular dining table in maple bent plywood designed by Ray and Charles Eames and produced by Evans Plywood Division for Herman Miller. Dubbed the DTW-1 (“Dining Table ...
Category

Mid-20th Century American Mid-Century Modern Dining Room Tables

Materials

Plywood, Maple

Herman Miller Eames Conference or Dining Table in Rosewood
By Charles and Ray Eames, Herman Miller
Located in Cedar Falls, IA
Charles and Ray Eames segmented base table for Herman Miller. 10 foot continuous length top. Incredible rosewood color and grain throughout. Polished...
Category

Vintage 1970s American Mid-Century Modern Dining Room Tables

Materials

Aluminum

Recently Viewed

View All