Skip to main content
Want more images or videos?
Request additional images or videos from the seller
1 of 18

1940s Pair of Early Charles Eames for Herman Miller Lcw Lounge Chairs in Birch

About the Item

Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the 5-2-5 screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table. We can refinish these if you desire, but they are all in very nice usable shape.

More From This Seller

View All
1940s Pair of Early Charles Eames for Herman Miller LCW Lounge Chairs in Oak
By Charles and Ray Eames, Herman Miller, Evans Products Company
Located in Philadelphia, PA
Designed in the late 1940s by Charles Eames, this chair has cemented itself in Mid-Century Design like very few other pieces. Early models like this are difficult to come by and are very rarely in such good condition, as many have been worked on in some way or another before their value shot up. These chairs feature a super sleek design of steam-bent plywood, an incredibly innovative technique pioneered by Herman Miller in collaboration with the Eames's and manufacturing firm Evans. The large seat and back are mounted to a molded plywood base with rubber shock mounts, another Eames staple. This allows them to have excellent contrast through spacing, which gives them an excellent stance, almost insect-like. Both are early chairs with the correct screw configurations beneath. This pair features all original hardware, finish, and shock mounts. Very few blemishes, and those that exist are minimal, barely visible even in our high-res pictures. At this time, we have two early pairs, as seen in in photos. We also have another single early model, and two extremely rare pre-production chairs with the accompanying molded plywood coffee table...
Category

Vintage 1940s American Mid-Century Modern Lounge Chairs

Materials

Plywood

Pair of Charles & Ray Eames Herman Miller Black Leather "Soft Pad" Lounge Chairs
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
Designed by Charles and Ray Eames in the late 1950s, this pair of black leather lounge chairs is the pinnacle of the Herman Miller Aluminum Group family of seating. This pair is not ...
Category

2010s American Mid-Century Modern Lounge Chairs

Materials

Aluminum, Steel, Chrome

Charles & Ray Eames for Herman Miller Restored Rosewood Conference Dining Table
By Charles and Ray Eames, Herman Miller
Located in Philadelphia, PA
This rare table was designed by Charles and Ray Eames in the early 1960s for Herman Miller, the producer of all Eames designs at the time. It was not widely produced at the time, and...
Category

Vintage 1960s American Mid-Century Modern Dining Room Tables

Materials

Aluminum, Steel

Rare & Original George Nelson Steel Frame Lounge Chairs Pair Herman Miller 1950s
By Herman Miller, George Nelson
Located in Philadelphia, PA
Super rare! George Nelson for Herman Miller steel frame chairs, model 5080 Easy Lounge Chairs. Original painted frames with solid wood arms. Orig...
Category

Vintage 1950s American Mid-Century Modern Lounge Chairs

Materials

Steel

Mid-Century Charles Eames for Herman Miller Fiberglass Dining Chairs in Orange
By Herman Miller, Charles Eames
Located in Philadelphia, PA
Here we have an iconic design classic from the Mid-Century Modern period. This vintage fiberglass shell chair was designed by Charles Eames and produced by Herman Miller, circa 1972....
Category

Vintage 1970s American Mid-Century Modern Dining Room Chairs

Materials

Steel

Set of 4 Mid-Century Modern Dining Chairs by Charles Eames for Herman Miller
By Charles Eames, Herman Miller
Located in Philadelphia, PA
A nice early set of four DCW chairs designed by Charles Eames and produced by Herman Miller in the 1950's. These feature dark stained plywood construction. Nice warm patina and likel...
Category

Vintage 1950s American Mid-Century Modern Dining Room Chairs

Materials

Plywood

You May Also Like

Early LCW Lounge Chair in Walnut, Charles & Ray Eames Herman Miller 1940s
By Evans Products Company, Herman Miller, Charles and Ray Eames, Charles Eames
Located in Vorst, BE
An early LCW (Lounge Chair Wood) in Walnut veneer. Chair sold by Herman Miller, but produced by Evans Plywood in 1948-1949. The 5-2-5 screw arrangement beneath has only be used by E...
Category

Mid-20th Century American Mid-Century Modern Lounge Chairs

Materials

Walnut, Plywood

1950s Pair of Herman Miller Eames LCW Lounge Chairs in Calico Ash
By Herman Miller, Charles and Ray Eames
Located in Philadelphia, PA
This is a pair of LCW Lounge Chairs, originally designed by Ray and Charles Eames in 1948. They are early Herman Miller examples and feature the 5-2-4 screw pattern, dating back to t...
Category

Vintage 1950s American Modern Lounge Chairs

Materials

Steel

Set of Two '2' Herman Miller LCW Lounge Chairs by Charles & Ray Eames, USA
By Herman Miller, Charles and Ray Eames
Located in Deland, FL
Stately, minimal but certainly not understated. This 90's produced pair of LCW chairs by Charles and Ray Eames for Herman Miller has been reimaged in matte black; offered for your consideration as a limited custom release from ABT Modern. From the first of the plywood series, the abbreviated Eames LCW Chair was the Lounge Height (L) Side Chair (C) on Wood (W) Base. Designed by Charles Eames and first manufactured by the Evans Molded Plywood Division, the chair has long gained classic status. The techniques used to make these unique chairs had been developed during the war years and was evident in the Eames Splint, made for and utilized by the US Navy. The Eames LCW Plywood Chair...
Category

1990s American Mid-Century Modern Lounge Chairs

Materials

Walnut

Eames Herman Miller LCW Lounge Chairs in British Forest Green Wool, Pair
By Herman Miller, Charles and Ray Eames
Located in Stamford, CT
The celebrated portfolio of Charles and Ray Eames continues to inspire designers to this day. Early in their mission to create furniture for the masses, the Eameses explored innovati...
Category

2010s American Mid-Century Modern Lounge Chairs

Materials

Fabric, Wool, Walnut, Plywood

Eames LCW Plywood Lounge Chairs in Walnut & Herman Miller Blue Fabric, Pair
By Herman Miller, Charles and Ray Eames
Located in Stamford, CT
The celebrated portfolio of Charles and Ray Eames continues to inspire designers to this day. Early in their mission to create furniture for the masses, the Eameses explored innovati...
Category

2010s American Mid-Century Modern Lounge Chairs

Materials

Fabric, Upholstery, Walnut, Plywood

Charles and Ray Eames for Herman Miller Early Aniline Dye Red LCW Chair 1950s
By Charles and Ray Eames, Herman Miller
Located in Brooklyn, NY
Red aniline dye LCW lounge chair, designed by Charles and Ray Eames and manufactured by Herman Miller. The aniline-dyed wood is vibrant and rich, showcasing the dramatic grain undern...
Category

Vintage 1950s American Mid-Century Modern Lounge Chairs

Materials

Plywood

Recently Viewed

View All